Vet and assistant conducting an eye surgery on a geriatric alpaca patient using the Shearing & Procedure Table
|
Shearing and Procedure Tables enable alpaca owners to shear their herd at their leisure in a safe manner for both the
alpaca and the owner. Our Shearing and Procedure Table was designed for portability, ease of use, compact storage capability and safe use
with the least amount of strain on the owners and alpacas.
The Alpaca
Shearing and
Procedure Table is an indispensable piece of equipment
for alpaca owners. The table assembles and disassembles
easily for transport or storage, and can be stored in area less than
6" in width when the legs are removed. The
Shearing and
Procedure Table can be
easily transported in the bed of a pickup truck. Extension arms on
either side can be adjusted to accommodate both large and small
animals. The top is an 'hourglass' shape, which enables the shearer
easier access.
The
Shearing and
Procedure Table top is constructed on an ingenious hinge device, enabling
the shearer to strap the alpaca safely in place while the top is
vertical, then swing both table top and alpaca to a horizontal
position for shearing. The table top will pivot vertically to either
side. The shearing table comes complete with a nylon abdomen support
for safely securing and releasing your alpaca, and four adjustable
leg restraints.
The Shearing & Procedure table also works well for veterinary procedures such as surgeries and geldings.
"This shearing table is affordable and
effective! I have shorn several hundred head of alpacas each spring
comfortably for the past several years on this table. It is easy to
break down and reassemble and carry with me in my Suburban or
mini-van all over the state and beyond as I shear for others. We
have also used it at home on the farm for toenail trimming for the
particularly uncooperative alpacas and for restraint while trimming
teeth or performing some veterinary procedures."
Jodi
Jeff & Jodi Wever 
Poco Lago Alpacas
Knightstown, IN
|
|
Dimensions:
Table top is approx 4’x8’ & will fit in the bed area of a full size pick up or anywhere a sheet of plywood will fit.
Table height is 30" in the horizontal position. |
|
.JPG',800,600))
.JPG',800,600))
.gif',800,600))
.JPG',800,600))
.JPG',800,600))
.JPG',800,600))
.JPG',800,600))
.JPG',800,600))
.JPG',800,600))
.JPG',800,600))
.JPG',800,600))
.JPG',800,600))
.gif)
.gif)
